PRODUCT DESCRIPTION
MX-64T supports TTL communication.
Recommended voltage of MX-64 is different than that of the former RX-64.
Operating Voltage : 10~14.8V (Recommended Voltage: 12V)
PRODUCT HIGHLIGHTS
- Advanced durability, 360 degrees of precision, and a wider control zone were achieved thanks to the new CONTACTLESS ABSOLUTE ENCODER
- 360 degrees POSITION CONTROL without dead zones
- 4,096 PRECISE RESOLUTIONS by 0.088 degrees
- SPEED CONTROL at ENDLESS TURN MODE
- Reliability and accuracy were advanced in the position control through PID CONTROL
- High baud rate up to 4.5 Mbps
- TTL LEVEL COMMUNICATION
- Torque control via current sensing
**The assembly structure of the MX-64 and RX-64 are the same but there were some modifications to the case.**
PACKAGE CONTENTS
Description |
Qty |
DYNAMIXEL |
MX-64T |
1 |
HORN |
HN05-N102 (MX Exclusive) |
1 |
WASHER |
Thrust Washer |
1 |
CABLE |
3P Cable 200mm |
1 |
BOLT/NUT |
Wrench Bolt M2.5*4 |
16pcs |
Wrench Bolt M3*8 |
1pcs |
Nut M2.5 |
18pcs |
HARDWARE SPECIFICATIONS
Description |
Specification |
Weight |
126g |
Dimension |
40.2mm x 61.1mm x 41mm |
Gear Ratio |
200 : 1 |
Operation Voltage (V) |
10 |
12 |
14.8 |
Stall Torque (N.m) |
5.5 |
6 |
7.3 |
Stall Current (A) |
3.9 |
4.1 |
5.2 |
No Load Speed (RPM) |
58 |
63 |
78 |
Motor |
Maxon Motor |
Minimum Control Angle |
About 0.088 degrees x 4,096 |
Operating Range |
Actuator Mode : 360 degrees Wheel Mode : Endless turn |
Operating Voltage |
10~14.8V (Recommended voltage : 12V) |
Operating Temperature |
-5°C ~ 80°C |
Command Signal |
Digital Packet |
Protocol |
Half duplex Asynchronous Serial Communication (8bit,1stop, No Parity) |
Link (physical) |
TTL Multi Drop (daisy chain type connector) |
ID |
254 ID (0~253) |
Baud Rate |
8000bps ~ 4.5Mbps |
Feedback Functions |
Position, Temperature, Load, Input Voltage, Current, etc. |
Material |
Case : Engineering Plastic Gear : Full Metal |
Position Sensor |
Contactless, absolute encoder |
Default |
ID #1 – 57600bps |
Compatible Product |
Click : Compatibility Chart |
Drawings |
Click : 2D and 3D |
e-Manual |
Click : http://support.robotis.com |
** After purchase, please change the ID and baud rate according to how you will use the actuator.
SOFTWARE ENVIRONMENT
- Software for Dynamixel control: ROBOPLUS - Download
- C/C++, C#, Labview, MATLAB, Visual Basic, etc.: Library – Download
PRODUCT DESCRIPTION
MX-64T supports TTL communication.
Recommended voltage of MX-64 is different than that of the former RX-64.
Operating Voltage : 10~14.8V (Recommended Voltage: 12V)
PRODUCT HIGHLIGHTS
- Advanced durability, 360 degrees of precision, and a wider control zone were achieved thanks to the new CONTACTLESS ABSOLUTE ENCODER
- 360 degrees POSITION CONTROL without dead zones
- 4,096 PRECISE RESOLUTIONS by 0.088 degrees
- SPEED CONTROL at ENDLESS TURN MODE
- Reliability and accuracy were advanced in the position control through PID CONTROL
- High baud rate up to 4.5 Mbps
- TTL LEVEL COMMUNICATION
- Torque control via current sensing
**The assembly structure of the MX-64 and RX-64 are the same but there were some modifications to the case.**
PACKAGE CONTENTS
Description |
Qty |
DYNAMIXEL |
MX-64T |
1 |
HORN |
HN05-N102 (MX Exclusive) |
1 |
WASHER |
Thrust Washer |
1 |
CABLE |
3P Cable 200mm |
1 |
BOLT/NUT |
Wrench Bolt M2.5*4 |
16pcs |
Wrench Bolt M3*8 |
1pcs |
Nut M2.5 |
18pcs |
HARDWARE SPECIFICATIONS
Description |
Specification |
Weight |
126g |
Dimension |
40.2mm x 61.1mm x 41mm |
Gear Ratio |
200 : 1 |
Operation Voltage (V) |
10 |
12 |
14.8 |
Stall Torque (N.m) |
5.5 |
6 |
7.3 |
Stall Current (A) |
3.9 |
4.1 |
5.2 |
No Load Speed (RPM) |
58 |
63 |
78 |
Motor |
Maxon Motor |
Minimum Control Angle |
About 0.088 degrees x 4,096 |
Operating Range |
Actuator Mode : 360 degrees Wheel Mode : Endless turn |
Operating Voltage |
10~14.8V (Recommended voltage : 12V) |
Operating Temperature |
-5°C ~ 80°C |
Command Signal |
Digital Packet |
Protocol |
Half duplex Asynchronous Serial Communication (8bit,1stop, No Parity) |
Link (physical) |
TTL Multi Drop (daisy chain type connector) |
ID |
254 ID (0~253) |
Baud Rate |
8000bps ~ 4.5Mbps |
Feedback Functions |
Position, Temperature, Load, Input Voltage, Current, etc. |
Material |
Case : Engineering Plastic Gear : Full Metal |
Position Sensor |
Contactless, absolute encoder |
Default |
ID #1 – 57600bps |
Compatible Product |
Click : Compatibility Chart |
Drawings |
Click : 2D and 3D |
e-Manual |
Click : http://support.robotis.com |
** After purchase, please change the ID and baud rate according to how you will use the actuator.
SOFTWARE ENVIRONMENT
- Software for Dynamixel control: ROBOPLUS - Download
- C/C++, C#, Labview, MATLAB, Visual Basic, etc.: Library – Download